Common configuration of MCU periphery for Arduino Atmega boards. More...
Common configuration of MCU periphery for Arduino Atmega boards.
Definition in file boards/common/arduino-atmega/include/periph_conf.h.
The atmega2560/atmega1281/atmega328p has only one hardware SPI with fixed pin configuration, so all we can do here, is to enable or disable it...
The fixed pins for arduino uno and duemilanove (atmega328p) are: MOSI - PB3 (Arduino pin 11) MISO - PB4 (Arduino pin 12) SCK - PB5 (Arduino pin 13) SS - PB2 (Arduino pin 10) -> this pin is configured as output, but not used
The fixed pins for arduino-mega2560 and atmega1281 are: MOSI - PB2 (Arduino pin 51) MISO - PB3 (Arduino pin 50) SCK - PB1 (Arduino pin 52) SS - PB0 (Arduino pin 53) -> this pin is configured as output, but not used
The SS pin must be configured as output for the SPI device to work as master correctly, though we do not use it for now (as we handle the chip select externally for now)
|#define||SPI_NUMOF 1 /* set to 0 to disable SPI */|